MiPi NB-Max

MiPi NB-Max is a tool intended for reading and writing user data on UFS and eMMC chips.

Feature :

– Read / Write eMMC and UFS memory chip – Supports ISP (In-System Programming)

UFS / UMCP / ISP - Data transfer speed

– UFS/UMCPUFS 2.0 / 2.1 / 3.0 / 3.1 supported

UFS / UMCP / ISP - Data transfer speed

– HS-G2 high speed mode80-130 MB/s (writing) / 100-180 MB/s (reading) for 100 MB higher speed you need to use USB 3.0 + high speed SSD

UFS / UMCP / ISP - Data transfer speed

– UFS ISP Flying Line Mode PWM-G1 6-15MB/s (reading / writing)

EMMC/EMCP - Data transfer speed

– UFS ISP Flying Line Mode PWM-G1 6– EMMC 4.5 / 5.0 / 5.1 supported – HS200 80-120MB/s (write) / 120MB/s (read) – EMMC ISP 5-15MB/s (read / write)-15MB/s (reading / writing)

Upgrade NAND / PCIE / NVME / NOR / SPI / I2C Flash

– Supports UFS/UMCP dedicated descriptors, attributes, flags and other chip initialization and advanced setting – LUN cutting – Read / Write / Specify boot area – Read / Write EMMC/EMCP User Area and BOOT1/2 – Read / Write advanced RPMB, GPP – Enhanced Area setting – Voltage output (VCC, VCCQ) 1.1 V - 3.3 V + intelligent short circuit protection

Supported BGA :

– UFS BGA 254 – UFS BGA 153 – eMMC BGA 153-169 – eMMC BGA 254 – eMMC BGA 221 – eMMC BGA 162-186

Buy MiPi NB-Max