Easy JTAG Plus

Easy Jtag Plus Setup

Administrator March 2, 2021

In this post, we are giving complete information about the Easy JTAG Plus Setup. Z3X Easy Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

easy jtag plus setup

What is Z3X Easy Jtag Plus Box ?

Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

Z3X Easy Jtag Plus Outstanding Features :

  • One click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

Z3X Easy Jtag Plus Hardware Features :

  • Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
  • Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
  • Updated power management subsystem – full digital PWM with ADC control
  • Added Micro-USB connector (if additional power required)
  • Added VCC and VCCQ switch with overcurrent protection
  • Updated USB device interface: USB 2.0 480 Mbps (high speed)
  • Integrated ISP engine: Z3X high power pro engine (4 MB/s)
  • ISP support 1 and 4 bit* connection
  • Added eMMC 8-bit high-speed interface up to 42 MHz
  • Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
  • Integrated M-PHY* interface
  • Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
  • Integrated self-test core that excludes 90% faults in production
  • Integrated CCID card reader for Z3X Software Use

Z3X Easy Jtag Plus Hardware Benefits :

  • Box to Host PC speed increased up to 40 MB/sec
  • JTAG Interface speed increased by 20%
  • eMMC 1 Bit ISP Speed increased up to 4 MB/sec
  • eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
  • eMMC 4 Bit Speed up to 18 MB/sec
  • eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
  • Compatible with 99% host PC systems and OS
  • Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
  • Compatibility with most of the popular eMMC sockets (with supplied adapters)
  • Plug and Play for Windows OS 8/ 8.1/10
eMMC Socket Features :
  • Made from high quality materials
  • Over 10K cycles of lifetime performance
  • Support for a wide range of eMMC ICs
  • High-speed up to 40 MB/sec through 8-bit bus
  • EMI resistant design, low noise components
  • Integrated power logic (no need for additional power source)
  • Surge protection – smart fuse driven (0.5A threshold)

All Easy Jtag Plus Setup Download Here

Easy JTAG Classic Suite 3.8.0.4) Released

[+] Added VFS Emulation mode for major filesystems.
[*] Fixes and Improvements

For using VFS mount opton you need use go to partition manager window and click [mount] option.
Disk Z or lower letter apears in explorer.
Minimum requriments Windows 10 or newer
latest WinFSP driver. (Included in Setup)

eMMC FFU Added and Updated for following IC chips:

  •  KLM4G1FE3B-B001
  •  KLM8G1GEAC-B031
  •  KLM8G1GEND-B031
  •  KLM8G1GETF-B041
  •  KLM8G1WE4A-A001
  •  KLMAG1JENB-B031
  •  KLMAG1JENB-B041
  •  KLMAG2GE2A-A001
  •  KLMAG2GE2A-A002
  •  KLMAG2GEAC-B001
  •  KLMAG2GEAC-B002
  •  KLMAG2GEAC-B031
  •  KLMAG2GEND-B031
  •  KLMAG2JENB-B041
  •  KLMAG4FE4B-B002
  •  KLMAG4FEJA-A001
  •  KLMAG4FEJA-A002
  •  KLMBG2JENB-B041
  •  KLMBG4GE2A-A001
  •  KLMBG4GEAC-B031
  •  KLMBG4GEND-B031
  •  KLMBG4WEBC-B031
  •  KLMBG8FE4B-B001
  •  KLMCG4JETD-B041
  •  KLMCG8GE4A-A001
  •  KLMCG8GEAC-B001
  •  KLMCG8GEND-B031
  •  KM3H6001CA-B515
  •  KMDH6001DM-B422
  •  KMF5X0005A-A210
  •  KMFE10012M-B214
  •  KMFN10012A-B214
  •  KMFN10012M-B214
  •  KMK8X000VM-B412
  •  KMK8X000VM-B412
  •  KML5U000HM-B505
  •  KML7U000HM-B505
  •  KML7U000HM-B505
  •  KMN9W000RM-B205
  •  KMQ310006A-B419
  •  KMQ31000SM-B417
  •  KMQ310013M-B419
  •  KMQ310013M-B419
  •  KMQ7X000SA-B315
  •  KMQ8X000SA-B414
  •  KMQE10013M-B318
  •  KMQE60006M-B318
  •  KMQE60013M-B318
  •  KMQN10006M-B318
  •  KMQN1000SM-B316
  •  KMQN1000SM-B316
  •  KMQN1006B-B318
  •  KMQNW000SM-B316
  •  KMR310001M-B611
  •  KMR3100BA-B614
  •  KMR4Z0001A-B803
  •  KMR8X0001M-B608
  •  KMV2W000LM-B506
  •  KMV3W000LM-B310

Easy JTAG eMMC Plus v2.0

eMMC 5.1 Factory Firmware Update For

  • KLM8G2YE4C-C001
  • KLMBG2JETD-B041
  • KLMCG2KETM-B041
  • KLMCG2UCTA-B041
  • KMDH6001DA-B422
  • KMGD6001BM-B421
  • KMJ5X000WM-B413
  • KMK5U000VM-B309
  • KMK8X000VM-B412
  • KMKYL000VM-B603
  • KMNJS000ZM-B205
  • KMQ310013M-B419
  • KMQE60013M-B318
  • KMDD60018M-B320
  • KMDD60018M_B320
  • KMDP60018M_B425
  • KMFE60012M-B214
  • KMFN10012M-B214
  • KMFN60012M_FN62
  • KMFN60012M_FN62
  • KMFNX0012M-B214
  • KMGD6001BM-B421
  • KMQ310013B-B419
  • KMQ72000SM-B316
  • KMQ820013M-B419
  • KMQX10013M-B419
  • KMR4Z0001A-B803
  • KMR820001M-B609
  • KMRC10014M-B809
  • KMRE1000BM-B512
  • KMRNW0001M-B509

Easy JTAG BGA-153,162,221 eMMC Socket Adapter :

easy jtag plus full set

UFS Field Firmware Update added

  • MICRON-128GB-UFS-MT
  • SAMSUNG-KLUDG4U1EA-B0C1
  • SAMSUNG-KLUDG8V1EE-B0C1
  • SAMSUNG-KM2B8001CM-BB01
  • SAMSUNG-KM5V7001DM-B621
  • SAMSUNG-KM8B8001JM-BC01
  • SAMSUNG-KM8F8001JM-B813
  • SAMSUNG-KM8F8001MM-B813
  • SAMSUNG-KM8V7001JM-B810
  • SAMSUNG-KM8V8001JM-B813
  • SKhynix-H28S7Q302BMR_A002
  • SKhynix-H28S8Q302CMR
  • SKhynix-H28U62301AMR_D003
  • SKhynix-H28U74303AMR_D003
  • SKhynix-H9HQ16AECMMDAR
  • SKhynix-H9HQ16AFAMMDAR
  • SKhynix-H9HQ53ACPMMDAR
  • SKhynix-H9HQ53AECMMDAR
  • TOSHIBA-THGAF8G9T43BAIRB

Easy JTAG Plus BGA-254 2-in-1 eMMC/UFS Socket Adapter :

easy jtag ufs bga 254 adapter

Easy JTAG Plus UFS BGA-95 Socket Adapter :

easy jtag ufs bga 95 adapter

Easy JTAG 3.7.0.23

Added CSD patch wile uploading new firmware

Added new eMMC FFU files:

  • KLMBG4WEBD-B031
  • KLMCG2UCTA-B041
  • KLMCG8WEBD-B031
  • KMDP6001DA-B425
  • KMGP6001BM-B514
  • KMRX60014M-B614
  • KLM4G1YE4C-B001
  • KMF720012M-F722
  • KMFE60012M-B214
  • KMR4Z0001A-B803
  • KMRNW0001M-B503
Buy Z3X Easy JTAG Plus

FAQ :

Q1. What is easy JTAG Plus ?
Answer : Easy- JTAG Plus is an all in one service tool for phone boot repair, data recovery, memory programming and many other features. Supports MMC, ISP, JTAG, NAND, SPI interfaces.

Q2. What is the price of easy JTAG in India ?
Answer : Easy JTAG Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

Q3. What is the use of easy JTAG ?
Answer : now Easy JTAG Plus price not confirm becasue of worldwide shortages, will update soon when available in market.

Q4. Easy JTAG Plus eMMC Tool Latest Version ?
Answer : Easy JTAG Plus Latest Setup DOWNLOAD here.

Conclusion :

Z3X Easy JTAG Plus is an all in one service tool for phone boot repair, data recovery, memory programming and many other features. Supports MMC, ISP, JTAG, NAND, SPI interfaces. Z3X Easy JTAG Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

Easy JTAG Plus Setup DOWNLOAD